ASHLAND CHEMICAL CO DIV OF ASHLAND OIL INC -- 3507000 ISOPROPANOL 99% -- 6810-00-227-0410 
=====================  Product Identification  =====================

Product ID:3507000 ISOPROPANOL 99%
MSDS Date:05/05/1996
FSC:6810
NIIN:00-227-0410
=== Responsible Party ===
Company Name:ASHLAND CHEMICAL CO DIV OF ASHLAND OIL INC
Address:3849 FISHER RD
Box:2219
City:COLUMBUS
State:OH
ZIP:43228
Country:US
Info Phone Num:614-889-3333
Emergency Phone Num:800-274-5263
CAGE:7L600
=== Contractor Identification ===
Company Name:ASHLAND CHEMICAL CO
Box:2219
City:COLUMBUS
State:OH
ZIP:43216-2219
Country:US
Phone:614-790-3333/800-274-5263
CAGE:34897
Company Name:ASHLAND CHEMICAL CO DIV OF ASHLAND OIL INC
Address:3849 FISHER RD
Box:2219
City:COLUMBUS
State:OH
ZIP:43216
Country:US
Phone:614-790-3333 / 800-325-3751
CAGE:7L600
Company Name:UNITED TECHNOLOGIES AUTOMOTIVE GROUP
Address:1218 CENTRAL INDUSTRIAL DRIVE
City:ST LOUIS
State:MO
ZIP:63110
Phone:314-577-1100
CAGE:DO719

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPROPYL ALCOHOL (SARA 313)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: >99%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:400 PPM
ACGIH TLV:400 PPM/500STEL;9596

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NO DATA
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE-CAN CAUSE EYE IRRITATION. SKIN-MAY
    DRY SKIN. SWALLOW-SWALLOWING LARGE AMOUNTS MAY BE HARMFUL.
    INHA;AYION-BREATHING LARGE AMOUNTS MAY BE HARMFUL.
Explanation of Carcinogenicity:THIS MATERIAL CANNOT BE CLASSIFIED WITH
    REGARD TO CARCINOGENICITY. THIS MATERIAL IS NOT LISTED BY IARC, NTP
    OR OSHA.
Effects of Overexposure:EYE-STINGING, TEARING, REDNESS & SWELLING.
    SKIN-REDNESS, BURNING, DRYING, CRACKING & SKIN BURNS. SYMPTOMS:
    NAUSEA, VOMITING, DIARRHEA, DIZZINESS, DROWSINESS, WEAKANESS,
    FATIGUE, HEADACHE, UNCONSCIOUSN ESS, LOW BLOOD PRESSURE, IMPAIRED
    COORDINATION, CONFUSION, COMA.
Medical Cond Aggravated by Exposure:OVEREXPOSURE TO THIS MATERIAL HAS
    BEEN SUGGESTED AS A CAUSE OF THE FOLLOWING EFFECTS IN LABORATORY
    ANIMALS & MAY AGGRAVATE PRE-EXISTING DISORDERS OF THESES ORGANS IN
    HUMANS: MILD REVERSIBLE LIVER EFF.

=======================  First Aid Measures  =======================

First Aid:EYE-IMMEDIATELY MOVE INDIVIDUAL AWAY FROM EXPOSURE & INTO
    FRESH AIR. FLUSH EYES WITH WATER FOR 15 MIN; SEEK IMMEDIATE MEDICAL
    AID. SKIN-REMOVE CONTAMINATED CLOTHES. WASH AREA WITH SOAP & WATER.
    SEEK E MDICAL AID. SWALLOW-SEEK MEDICAL AID.IFCONSCIOUS & ALERT,
    INDUCE VOMITING BY GIVING SYRUP OF IPECAC. INHALE-IMMEDIATELY MOVE
    TO FRESH AIR. SEEK IMMEDIATE MEDICAL AID. GIVE OXYGEN OR CPR IF NOT
    BREATH

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:53.0F,11.7C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:2
Extinguishing Media:ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL. WATER
    MAY BE INEFFECTIVE. USE WATER TO COOL FIRE EXPOSED UNTIL FIRE IS
    OUT.
Fire Fighting Procedures:WEAR A SELF-CONTAINED BREATHING APPARATUS WITH
    A FULL FACEPIECE OPERATED IN POSITIVE MODE WITH TURN-OUT GEAR &
    CHEMICAL RESISTANT PERSONAL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR & MAY TRAVEL
    ALONG THE GROUND OR MOVED BY VENTILATION & IGNITED BY PILOT LIGHTS,
    OTHER FLAMES, SPARKS, OR OTHER IGNITION SOURCES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL ON VERMICULITE, FLOOR ABSORBENT
    OR OTHER ABSORBENT MATERIAL. ELIMINATE ALL IGNITION SOURCES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
    HAZARDOUS WHEN ENPTIED. SINCE EMPTIED CONTAINERS RETAIN PRODUCT
    RESIDUE ALL HAZARD PRECAUTIONS MUST BE OBSERVED.
Other Precautions:WARNING-SUDDEN RELEASE OF HOT ORG CHEM VAP/MIST FROM
    PROCESS EQPMT OEPRATING @HI TEMP/PRESS/SUDDEN INGRESS OF AIR INTO
    VAC EQPMT MAY RESULT IN IGN W/O IGN SOURCE.THROUGHLY EVALUATE PROD
    @HI TEMP TO MA INTAIN/ESTABL SAFE OPERATING CONDITIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF WORKPLACE EXPOSURE LIMITS OF PRODUCT OR ANY
    COMPONENT IS EXCEEDED, A NIOSH/MSHA APPROVED AIR SUPPLIED
    RESPIRATOR IS ADVISED IN THE ABSENCE OF PROPER ENVIRONMENTAL
    CONTROL.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL
    EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:WEAR RESISTANT GLOVES.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
DOT DESCRIPTION: ISOPROPANOL,3,UN1219,II.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:=82.2C, 180.F
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:33 @68F
Vapor Density:2.07
Spec Gravity:0.787 @60F
pH:NP
Viscosity:NP
Evaporation Rate & Reference:7.70 (N-BUTYL ACETATE=1)
Solubility in Water:HMIS:SOLUBLE.
Appearance and Odor:HMIS:LIQUID.
Percent Volatiles by Volume:100
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACETALDEHYDE, ACIDS, CHLORINE, ETHYLENE OXIDE, ISOCYANATES, STRONG
    OXIDZING AGNETS.
Stability Condition to Avoid:STABLE. DO NOT USE WITH ALUMINUM EQUIPMENT
    AT TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:MAY FORM: CARBON DIOXIDE AND CARBON
    MONOXIDE.
Conditions to Avoid Polymerization:PRODUCT WILL NOY UNDER GO HAZARDOUS
    POLYMERIZATION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
    LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.