FLECTO CO INC -- 91, VARATHANE LIQUID PLASTIC INTERIOR (SUPDAT)  -- 8010-01-393-5418
<pre>=====================  Product Identification  =====================

Product ID:91, VARATHANE LIQUID PLASTIC INTERIOR (SUPDAT)
MSDS Date:04/25/1986
FSC:8010
NIIN:01-393-5418
Status Code:A
=== Responsible Party ===
Company Name:FLECTO CO INC
Address:1000 45TH ST
City:OAKLAND
State:CA
ZIP:94608
Country:US
Info Phone Num:415-655-2470
Emergency Phone Num:415-655-2470
Preparer's Name:EDWARD H. QUESADA
CAGE:58381
=== Contractor Identification ===
Company Name:FLECTO CO INC
Address:1000 45TH ST
Box:City:OAKLAND
State:CA
ZIP:94608-3314
Country:US
Phone:800-635-3286
CAGE:58381

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT; (MINERAL SPIRITS).  VP: 2.0.
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 52%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:KEROSENE; (ALIPHATIC PETROLEUM DISTILLATES (KEROSENE))
CAS:8008-20-6
RTECS #:OA5500000
Fraction by Wt: <5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: BOTH A RESPIRATORY TRACT
    IRRITANT AND A CNS DEPRESSANT. INHALATION/INGESTION: A BURNING
    SENSATION IN THE NOSE AND THROAT, COUGH, A FEELING OF DIFFICULTY IN
    BREATHING. ALSO, HEADACHE, DIZZINESS,  STAGGERING GAIT, CONFUSION,
    UNCONSCIOUSNESS OR COMA. CONTACT WITH SKIN OR EYES: PRIMARY
    IRRITATION. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CHRONIC: UNKNOWN AT THIS TIME.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
    IRRITATION, DERMATITIS, NAUSEA, VOMITING.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT
    LEAST 15 MINUTES. CONSULT MD. SKIN: WASH AFFECTED AREAS WITH SOAP
    AND WATER. CONSULT MD IF IRRITATION PERSISTS. INHAL: REMOVE TO
    FRESH AIR, R ESTORE BREATHING, CONSULT MD. INGEST: DONOT INDUCE
    VOMITING. CALL MD IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1.0%
Extinguishing Media:FOAM, CARBON DIOXDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    BREATHING VAPORS. VENTILATE AND REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED MASK OR RESPIRATOR FOR ORGANIC
    VAPORS AS NECESSARY.
Ventilation:ADEQUATE VOLUME AND PATTERN TO AVOID VAPOR CONCENTRATION IN
    EXCESS OF TLV OR LEL.
Protective Gloves:NEOPRENE OR RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . USE
    IMPERMEABLE APRONS AND PROTECTIVE CLOTHING WHENEVER POSSIBLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: CLEAR FINISH SATIN.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>315F,>157C
Vapor Pres:SEE INGS
Vapor Density:>1
Spec Gravity:0.892 
Evaporation Rate &amp; Reference:<1 (ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR AMBER APPEARANCE WITH A MILD ALIPHATIC ODOR.
Percent Volatiles by Volume:64.3

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS OR OPEN FLAME. POOR
    VENTILATION, CORROSIVE ATMOSPHERES, EXCESSIVE AGING.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:NORMAL WASTE DISPOSAL METHODS. DO NOT INCINERATE
    IN CLOSED CONTAINERS. NOTE: DISPOSE OF ALL WASTES IN ACCORDANCE
    WITH FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.