PERVO PAINT CO -- 2418 ACRYLIC LATEX PRIMER  -- 8010-00N055148
<pre>=====================  Product Identification  =====================

Product ID:2418 ACRYLIC LATEX PRIMER
MSDS Date:02/12/1993
FSC:8010
NIIN:00N055148
=== Responsible Party ===
Company Name:PERVO PAINT CO
Address:6624 STANFORD AVE
City:LOS ANGELES
State:CA
ZIP:90001
Country:US
Info Phone Num:213-758-1147
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:86483
=== Contractor Identification ===
Company Name:PERVO PAINT CO
Address:6624 STANFORD AVE
Box:City:LOS ANGELES
State:CA
ZIP:90001
Country:US
Phone:213-758-1147
CAGE:86483

=============  Composition/Information on Ingredients  =============

Ingred Name:AMMONIUM HYDROXIDE; (AMMONIA)  (SARA III)
CAS:1336-21-6
RTECS #:BQ9625000
Fraction by Wt: TRACE
OSHA PEL:50 PPM (MFR)
ACGIH TLV:25 PPM (MFR)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:PROPIONIC ACID, 2-METHYL-, MONOESTER W/2,2,4-TRIMETHYL-1,
    3-PENTANEDIOL; (TEXANOL)
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: <1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2-3%
OSHA PEL:N/K 
ACGIH TLV:50 PPM, VAPOR, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:VOLATILE ORGANIC COMPONENT:EXEMPT WATER/EXEMPT SOLV - 115
    G/L(0.96 LBS/GAL);IN WATER/EXEMPT SOLV - 44 G/L(0.36 LBS/GAL).
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:PROLONGED OR REPEATED
    CONTACT OF PRODUCT MAY CAUSE IRRITATION. EYE:DIRECT CONTACT OF
    PRODUCT CAN CAUSE IRRITATION. INHAL:VAPOR OR MIST CAN CAUSE
    HEADACHE, NAUSEA, IRRITATION OF NOSE, THROAT  & EYES.
    INGEST:POISONOUS IF SWALLOWED.CAN EFFECT OPTIC NERVE & OTHER
    EFFECTS. CHRONIC:BASED ON (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:AVAILABLE DATA, PERMANENT ADVERSE
    EFFECTS ARE NOT EXPECTED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH AFFECTED AREAS W/WATER WHILE REMOVING CONTAM CLTHG.
    GET IMMED MED ATTN. LAUNDER CONTAM CLTHG BEFORE REUSE. EYES:FLUSH
    W/GENEROUS AMTS OF WATER FOR AT LST 15 MINS. GET IMMED MED ATTN.
    INGEST: DO NOT INDUCE VOMIT. DILUTE W/WATER/MILK & CALL MD IMMED.
    NEVER GIVE FLUIDS/INDUCE VOMIT IF VICTIM IS UNCON/HAVING CONVLS.
    INHAL:MOVE TO FRESH AIR. AID IN BRTHG, IF NEC & GET IMMED MED ATTN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM OR CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILLS SHOULD BE CONTAINED, SOLIDIFIED &
    PLACED IN RCRA LICENSED FACILITY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:EMPTY CONTAINERS W/NO RESIDUE AT ALL MAY BE
    LANDFILLED AT LICENSED FACILITY OR FOR RECONDITION. RECOMMEND
    CRUSHING OR OTHER MEANS TO PREVENT UNAUTHORIZED REUSE. OTHER
    CONTAINERS MUST BE DISPOSED OF IN  RCRA LICENSED FACILITY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
    WHEN VAPORS ARE GENERATED ABOVE PEL.
Ventilation:LOCAL EXHAUST TO CONTROL TO RECOMMEND PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:EMERG EYE WASH AND DELUGE SHOWER WHICH MEETS
    ANSI DESIGN CRITERIA . COVERALLS, APRONS, BOOTS - (SUPP DATA)
Work Hygienic Practices:SHOWER AFTER HANDLING THIS PRODUCT. CLEAN
    CLOTHING SHOULD BE WORN DAILY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER. OTHER PROT EQUIP: AS NECESSARY TO
    PREVENT SKIN CONTACT.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Vapor Pres:1.4 @ 20C
Vapor Density:0.62
Spec Gravity:1.4
pH:>9
Evaporation Rate &amp; Reference:0.33 (BUTYL ACETATE=1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE VISCOUS LIQUID; SLIGHTLY AMMONIA ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:KEEP AWAY FROM HEAT OR DIRECT STRONG
    SUNLIGHT.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . INCINERATE IN RCRA LICENSED FACILITY. DO NOT
    DISCHARGE INTO WATERWAYS OR SEWER SYSTEMS W/OUT PROPER
    AUTHORIZATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.