GOODYEAR -- 80C28-04 POLYURETHANE ADHESIVE CEMENT  -- 8040-00-518-3455
<pre>=====================  Product Identification  =====================

Product ID:80C28-04 POLYURETHANE ADHESIVE CEMENT
MSDS Date:01/01/1987
FSC:8040
NIIN:00-518-3455
=== Responsible Party ===
Company Name:GOODYEAR/AKRON, OH 44315
Emergency Phone Num:(216) 796-2121
CAGE:LO506
=== Contractor Identification ===
Company Name:ENGINEERED FABRICS CORP
Address:669 GOODYEAR STREET
Box:City:ROCKMART
State:GA
ZIP:30153
Country:US
Phone:404-684-7855/FAX -7438
CAGE:0KEA0
Company Name:GOODYEAR/AKRON, OH 44315
CAGE:LO506

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 85%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:4,4'-METHYLENE DIANILINE  (SARA III)
CAS:101-77-9
RTECS #:BY5425000
Fraction by Wt: 20%
ACGIH TLV:S; 0.1 PPM; A2; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:4,4'-METHYLENE DIANILINE  (SARA III)
CAS:101-77-9
RTECS #:BY5425000
ACGIH TLV:S; 0.1 PPM; A2; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION, SKIN ABSORPTION. EYE IRRITATION.
    FEVER/CHILLS/ANOREXIA/NAUSEA/RESPIRATORY IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: IF AFFECTED, REMOVE TO FRESH. SKIN: WASH EXPOSED
    AREA W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING. LAUNDER
    CONTAMINATED CLOTHING BEFORE RE-USE. EYE: FLUSH W/WATER. INGESTION:
    GIVE 2 GLASS ES OF WATER. INDUCE VOMITING. CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:21F CC
Lower Limits:12%
Upper Limits:20%
Extinguishing Media:AALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE A SCBA W/A FULL FACEPIECE UNDER POSITIVE
    PRESSURE.
Unusual Fire/Explosion Hazard:MAY TRAVEL ALONG THE GROUND/MAY BE MOVED
    BY VENT/IGNITED AT LOCATIONS DISTANT FROM THE MATERIAL.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. PROVIDE ADEQ.
    VENT. USE PERSONAL PROTECTIVE GEAR AS NECSARY. CONTAIN/LOCALIZE
    SPILL W/ABSORBENTS. PREV. DISCHARGE TO STORM/SANIRY SEWER. STORE
    SPENT SORBENT IN CONTAINER A PPROVED FOR STORAGE OF FLAMMATERIAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORAGE AREA SHOULD BE WELL
    VENTILATED. STORE AWAY FROM SOURCES OF HEAT OR OPEN FLAMES. KEEP
    CTAINER CLOSED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF >TLV'S, USE NIOSH/MSHA APPROVED RESPIRATOR TO
    PREV. OVEREXPOSURE.
Ventilation:PROVIDE ADEQ, EXPLOSION-PROOF VENT. TO KEEP BELOW TLV'S
Protective Gloves:BUTYL
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS PROTECTIVE CLOTHING TO
    PREVENT SKIN CONTACT.
Supplemental Safety and Health
MSDS DATED: NOV 1985. 2 PART POLYURETHANE ADHESIVE CEMENT FOR FUEL
    SYSTEM REPAIR.

==================  Physical/Chemical Properties  ==================

Vapor Pres:70.
Vapor Density:>1
Spec Gravity:0.864
Solubility in Water:SOLUBLE
Appearance and Odor:AMBER LIQUID, METHYL ETHYL KETONE ODOR.
Percent Volatiles by Volume:85.7

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS AND OPEN
    FLAME.
Hazardous Decomposition Products:CO, CO2, NOX

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE AT FACILITY APPROVED FOR HAZARDOUS
    WASTE DISPOSAL BY FEDERAL, STATE & LOCAL REGULATIONS. LANDFILL
    PRODUCT OR CONTAMINATED SORBENT OR SOIL ONLY WHEN SOLIDIFIED W/NO
    FREE LIQUIDS REMAINING/TH EN IN HAZARDOUS WASTE DISPOSAL LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.