HERNON MANUFACTURING INC -- ANAEROBIC ADHESIVE 420  -- 8030-01-069-0346
<pre>=====================  Product Identification  =====================

Product ID:ANAEROBIC ADHESIVE 420
MSDS Date:02/01/1989
FSC:8030
NIIN:01-069-0346
=== Responsible Party ===
Company Name:HERNON MANUFACTURING INC
Address:121 TECH DR
City:SANFORD
State:FL
ZIP:32771
Country:US
Info Phone Num:407-322-4000
Emergency Phone Num:407-322-4000
CAGE:DO346
=== Contractor Identification ===
Company Name:HERNON MANUFACTURING
Address:121 TECH DRIVE
Box:City:SANFORD
State:FL
ZIP:32771
Country:US
Phone:407-322-4000/800-255-3924
CAGE:61603
Company Name:HERNON MANUFACTURING INC.
Address:865 ESSEX STREET
City:BROOKLYN
State:NY
ZIP:11208-5220
Phone:718-649-3000
CAGE:DO346

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYGLYCOL DIMETHACRYLATE
Fraction by Wt: 55-60%

Ingred Name:SACCHARIN (SARA III)
CAS:81-07-2
RTECS #:DE4200000
Fraction by Wt: 1-3%
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:N,N-DIALKYLTOLUIDINE
Fraction by Wt: <1%

Ingred Name:1-METHYL-1-PHENYLETHYL HYDROPEROXIDE (CUMENE HYDROPEROXIDE)
    (SARA III)
CAS:80-15-9
RTECS #:MX2450000
Fraction by Wt: 1-3%
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

Ingred Name:SILICA, CRYSTALLINE - FUSED
CAS:60676-86-0
RTECS #:VV7328000
Fraction by Wt: <2%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Ingred Name:POLYESTER PLASTISIZER
Fraction by Wt: 30-35%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:SACCHARIN HAS BEEN SHOWN TO CAUSE
    TUMORS IN EXPERIMENTAL ANIMALS WHEN FED IN LARGE AMOUNTS FOR
    PROLONGED PERIODS. IN ONE EXPERIMENT, PURE CUMENE HYDROPEROXIDE
    CAUSED TUMORS IN ONE OF 30 EXPERIMENTAL A NIMALS WHEN INJECTED
    UNDER THE SKIN. INHALATION OF PURE SILICON DIOXIDE IN LARGE
    QUANTITIES HAS (SEE EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:SACCHARIN: IRAC 2B, NTP 2.
Effects of Overexposure:HLTH HAZ:BEEN SHOWN TO CAUSE PULMONARY EFTS.
    DUE TO LOW CONC OF COMPONENTS IN PROD, IT IS MFR'S TECHNICAL
    JUDGMENT THAT UNDER NORMAL USE THIS PROD DOES NOT CAUSE ANY OF
    ABOVE MENTIONED HAZARDS. THESE  WARNINGS ARE PRESENT ONLY TO COMPLY
    W/OSHA REGULATIONS. PRLNGD CNTCT W/SENSITIVE INDIVIDUALS MAY CAUSE
    DERMATITIS.
Medical Cond Aggravated by Exposure:SKIN IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH WITH WATER AT LEAST 15 MIN. SKIN: FLUSH WITH WATER.
    INGEST:DO NOT INDUCE VOMITING, GET MD. INHAL:REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION) .

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:200F,93C
Extinguishing Media:FOAM, DRY CHEMICAL, CO*2
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA AND PROTECTIVE
    CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING CHEMICALS.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN INERT ABSORBENT. STORE IN CLOSED
    CONTAINER UNTIL DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 75F +/- 5F TO PRESERVE
    SHELF LIFE. AVOID PROLONGED SKIN CONTACT. KEEP AWAY FROM CHILDREN.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST IS NECESSARY.
Protective Gloves:SAFETY GLOVES RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT NECESSARY
Work Hygienic Practices:AS REQUIRED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5 @ 80F
Spec Gravity:1.05
Evaporation Rate &amp; Reference:POLYMERIZES
Solubility in Water:LOW
Appearance and Odor:PURPLE LIQUID, MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:STRONG OXIDIZING AGENTS AND METALLIC
    SALTS.
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:EXCESSIVE HEAT

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURY OR INCINERATE I/A/W FEDERAL, STATE AND
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.