HERNON MANUFACTURING, INC. -- ANAEROBIC ADHESIVE 824  -- 8030-00-181-7603
<pre>=====================  Product Identification  =====================

Product ID:ANAEROBIC ADHESIVE 824
MSDS Date:10/01/1989
FSC:8030
NIIN:00-181-7603
=== Responsible Party ===
Company Name:HERNON MANUFACTURING, INC.
Address:865 ESSEX STREET
City:BROOKLYN
State:NY
ZIP:11208
Country:US
Info Phone Num:718-649-3000
Emergency Phone Num:718-649-3000
CAGE:DO346
=== Contractor Identification ===
Company Name:HERNON MANUFACTURING
Address:121 TECH DRIVE
Box:City:SANFORD
State:FL
ZIP:32771
Country:US
Phone:407-322-4000/800-255-3924
CAGE:61603
Company Name:HERNON MANUFACTURING INC.
Address:865 ESSEX STREET
City:BROOKLYN
State:NY
ZIP:11208-5220
Phone:718-649-3000
CAGE:DO346

=============  Composition/Information on Ingredients  =============

Ingred Name:DIALKYTOLUIDINE
Fraction by Wt: < 1%
Other REC Limits:NONE SPECIFIED

Ingred Name:SACCHARIN  (SARA III)
CAS:81-07-2
RTECS #:DE4200000
Fraction by Wt: 2-3%
Other REC Limits:NONE SPECIFIED
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:ORGANIC PEROXIDE
Fraction by Wt: < 4%
Other REC Limits:NONE SPECIFIED
OSHA PEL:50 PPM
ACGIH TLV:50 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE
Effects of Overexposure:PROLONGED EXPOSURE TO SKIN MAY CAUSE IRRITATION
    TO A SENSITIVE PERSON.
Medical Cond Aggravated by Exposure:A SENSITIVE PERSON

=======================  First Aid Measures  =======================

First Aid:SKIN CONTACT: FLUSH WITH WATER. EYE CONTACT:FLUSH WITH WATER.
    INGESTION:DO NOT INDUCE VOMITING. SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:> 200F/> 93C
Extinguishing Media:FOAM, DRY CHEMICAL
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS AND
    PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
    CHEMICALS.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN INERT ABSORBENT. STORE IN CLOSED
    CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 100F AND AVOID PROLONGED
    SKIN CONTACT.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NECESSARY
Ventilation:MECHANICAL (GENERAL): REQUIRED
Protective Gloves:RUBBER OR PLASTIC RECOMMENDED
Eye Protection:SAFETY GLASSES RECOMMENDED
Other Protective Equipment:NONE
Work Hygienic Practices:AS REQUIRED
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:5 @ 80F
Spec Gravity:1.1 @ 80F
Evaporation Rate &amp; Reference:POLYMERIZES
Solubility in Water:LOW
Appearance and Odor:GREEN LIQUID -ODOR:MILD

=================  Stability and Reactivity Data  =================

STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:EXCESSIVE HEAT

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR BURY IN ACCORDANCE WITH LOCAL AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.