SHELL OIL CO -- VALVATA OIL J680, 63053  -- 9150-00N020249
<pre>=====================  Product Identification  =====================

Product ID:VALVATA OIL J680, 63053
MSDS Date:05/30/1991
FSC:9150
NIIN:00N020249
=== Responsible Party ===
Company Name:SHELL OIL CO
Box:4320
City:HOUSTON
State:TX
ZIP:77210
Country:US
Info Phone Num:713-241-4819
Emergency Phone Num:713-473-9461;800-424-9300(CHEMTREC)
Preparer's Name:G.A. VAN GELDER
CAGE:SHELO
=== Contractor Identification ===
Company Name:SHELL OIL CO
Box:4320
City:HOUSTON
State:TX
ZIP:77210-5000
Country:US
Phone:713-473-9461/713-241-2252
CAGE:SHELO
Company Name:SHELL OIL COMPANY
Address:Box:2463
City:HOUSTON
State:TX
ZIP:77210
Country:US
Phone:800-231-6950
CAGE:54527

=============  Composition/Information on Ingredients  =============

Ingred Name:SOLVENT REFINED HYDROTREATED RESIDUAL OIL
CAS:64742-57-0
Fraction by Wt: 80-85%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:PROPENE, 2-METHYL-, POLYMERS; (POLYMERIC VISCOSITY
    IMPROVER)
CAS:9003-27-4
RTECS #:UD1010000
Fraction by Wt: 10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ANIMAL FAT
CAS:68153-81-1
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:MINOR ADDITIVES
Fraction by Wt: <1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:FIRST AID PROC:HOWEVER, GET MED ATTN. NOTE TO MD:IN GEN,
    EMESIS INDUCTION IS UNNEC IN HIGH VISCOSITY, LOW (ING 6)
RTECS #:9999999ZZ

Ingred Name:ING 5:VOLATILITY PRODUCTS, I.E, MOST OILS & GREASES.
RTECS #:9999999ZZ

Ingred Name:SPILL PROC:SALVAGE VESSELS. SOAK UP RESIDUE W/ABSORB SUCH
    AS CLAY, SAND/OTHER SUITABLE MATL; DISP OF PROPERLY. (ING 8)
RTECS #:9999999ZZ

Ingred Name:ING 7:FLUSH AREA W/WATER TO REMOVE TRACE RESIDUE. SM
    SPILLS:TAKE UP W/ABSORB MATL & DISPOSE OF PROPERLY.
RTECS #:9999999ZZ

Ingred Name:HYGIENE PRACT:PROPERLY DISPOSE OF CONTAM LEATHER ARTICLES,
    INCL SHOES, THAT CANNOT BE DECONTAM & SHOULD BE DESTROYED.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:HEALTH EFFECTS ARE CONSISTENT
    W/REQUIREMENTS UNDER OSHA HAZARD COMMUNICATIONS (29 CFR 1910.1200).
    EYE CONTACT:LUBRICATING OILS ARE GENERALLY CONSIDERED NO MORE THAN
    MINIMALLY IRRITATING. SKIN CONTACT: LUBRICATING OILS ARE GENERALLY
    CONSIDERED NO MORE THAN MILDLY IRRITATING. PROLONGED AND REPEATED
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CONT MAY LEAD TO VARIOUS DISORDERS
    SUCH AS DERM, OIL ACNE/FOLLICULITIS. INHAL:INHAL OF VAPS (GENERATED
    AT HIGH TEMPS ONLY)/OIL MIST FROM THIS PROD MAY CAUSE MILD IRRIT OF
    UPPER RESP TRACT. IN GEST:LUBRICATING OILS ARE GENRLY CONSIDERED NO
    MORE THAN SLIGHTLY TOX IF SWALLOWED. SIGNS & SYMPS:IRRIT AS NOTED.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & RESPIRATORY
    DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH W/PLENTY OF WATER FOR AT LST 15 MINS WHILE HOLDING
    EYELIDS OPEN. GET MED ATTN. SKIN:REMOVE CONTAM CLTHG/SHOES & WIPE
    EXCESS FROM SKIN. FLUSH W/WATER. FOLLOW W/SOAP & WATER. IF IRRIT
    OCCURS,  GET MED ATTN. INHAL:REMOVE VICTIM TO FRESH AIR & PROVIDE
    OXYG IF BRTHG IS DFCLT. GET MED ATTN. INGEST:DO NOT INDUCE VOMIT.
    IN GEN, NO TREATMENT IS NEC UNLESS LG QTYS OF PROD ARE INGESTED.
    (ING 5)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:490F,254C
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEM/CO*2. DO NOT USE
    DIRECT STREAM OF WATER. PROD WILL FLOAT & CAN BE REIGNITED ON (SUPP
    DATA)
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . MATERIAL WILL NOT BURN UNLESS PREHEATED. COOL FIRE
    EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
    CAUTIOUS JUDGEMENT WHEN CLEANING UP LG SPILLS. LG SPILLS:WEAR NIOSH
    APPRVD RESP & PROT CLTHG AS APPROP. SHUT OFF SOURCE OF LEAK IF SAFE
    TO DO SO. DIKE & CN TN. REMOVE W/VACUUM TRUCKS/PUMP TO STOR/ (ING
    7)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE W/ADEQUATE
    VENTILATION. KEEP AWAY FROM OPEN FLAMES & HIGH TEMPERATURES.
Other Precautions:BE SAFE. READ MFR'S PRODUCT SAFETY INFORMATION  PASS
    IT ON.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED OCCUPATIONAL
    EXPOSURE LIMITS USE NIOSH APPROVED RESPIRATOR TO PREVENT
    OVEREXPOSURE. I/A/W 29 CFR 1910.134 USE EITHER A NIOSH APPRVD
    ATM-SUPPLYING RESP/AIR-PURIFYING RESP  FOR ORGANIC VAPORS &
    PARTICULATES.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:CHEMICAL RESISTANT GLOVES (NITRILE)
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
    SHOWER . WEAR OTHER PROT CLTHG AS REQD TO MIN SKIN CONT. TEST DATA
    (SUPDAT)
Work Hygienic Practices:WASH W/SOAP & WATER BEFORE EATING, DRINKING,
    SMOKING/USING TOILET FACILITIES. LAUNDER CONTAM CLTHG BEFORE REUSE.
    (ING 9)
Supplemental Safety and Health
EXTING MEDIA:SURF OF WATER. HAZ DECOMP PROD:GASES WILL EVOLVE WHEN THIS
    MATL UNDERGOES PYROLYSIS/COMBUST. CARBON MONOXIDE & OTHER
    UNIDENTIFIED ORGANIC CMPDS MAY BE FORMED UPON COMBUST. OTHER PROT
    EQUI P:FROM PUBLISHED LITERATURE &/OR CLTHG MFRS INDICATE BEST PROT
    IS PROVIDED BY NITRILE GLOVES.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:30.0F,-1.1C
Spec Gravity:0.934 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK, VISCOUS OIL W/STRONG HYDROCARBON ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT & OPEN FLAME.
Hazardous Decomposition Products:THERMAL DECOMP PRODS ARE HIGHLY
    DEPENDENT ON COMBUST CNDTNS. COMPLEX MIXT OF AIRBORNE SOLID, LIQ,
    PARTICULATES &(SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.